Amber flashing beacon 80 LEDs magnetic warning light
Amber flashing beacon 80 LEDs magnetic warning light
Amber Flashing Beacon 12V 24V with 80 LEDs, Magnetic Mount and 3 Warning Modes
Get a highly visible amber warning signal on your vehicle with quick, straightforward setup. This Amber Flashing Beacon combines 80 x 5730 SMD LEDs with three selectable warning patterns, providing a practical warning light for trucks, lorries, vans and other suitable commercial vehicles.
No permanent installation is required. Position the magnetic base on a suitable metal surface, connect the 3.5 metre coiled cable to a compatible 12V or 24V cigarette lighter socket and select the required warning mode. The simple connection and flexible cable make it easy to position the beacon where required.
Key Benefits
- 80 LED warning light: equipped with 80 x 5730 SMD LEDs to produce an attention-grabbing amber warning signal.
- 3 selectable warning patterns: choose between a rotating light effect, six-flash pattern and double-flash pattern.
- Quick magnetic mounting: position the beacon directly on a suitable metal surface without permanent installation.
- 12V and 24V operation: designed for compatible trucks, lorries, vans and other commercial vehicles.
- 3.5 metre coiled cable: provides useful reach and greater flexibility when choosing the most suitable position for the beacon.
- IP65 protection: the housing provides protection against dust and water jets.
Applications
The Amber Flashing Beacon is designed for situations where an attention-grabbing amber warning signal is required on a suitable vehicle. According to the supplied product information, it is intended for trucks, lorries, vans and other commercial vehicles.
The combination of a magnetic base and cigarette lighter connection makes the beacon particularly practical when permanent installation is not required. It can be positioned on a suitable metal surface and connected to the vehicle's compatible power socket when needed.
Its 12V and 24V compatibility allows the same beacon design to be used with compatible vehicles operating on either voltage. This makes it suitable for different vehicle applications without requiring separate 12V and 24V versions.
The 3.5 metre coiled cable also gives you more freedom when deciding where to position the warning light. The cable should always be routed carefully so that it does not interfere with the safe operation of the vehicle.
Quick Magnetic Mounting
Setting up the beacon is straightforward. The magnetic base allows the unit to be placed directly onto a suitable metal surface, eliminating the need for permanent mounting when used as specified.
This makes it convenient when the beacon needs to be positioned for use and removed afterwards. Before operation, always check that the selected surface is suitable and that the magnetic base is securely positioned.
Once the beacon has been positioned, connect the cigarette lighter plug to a compatible 12V or 24V socket. The 3.5 metre coiled cable provides additional reach between the power connection and the selected mounting position.
3 Selectable Warning Modes
Different situations can require different warning patterns. This Amber Flashing Beacon provides three selectable operating modes, allowing the light pattern to be changed using the three-position function switch.
The first setting produces a rotating light effect. The second provides a six-flash pattern, while the third provides a double-flash pattern.
All three modes use the beacon's 80 x 5730 SMD LED light source, giving you multiple warning patterns from a single unit.
12V and 24V Vehicle Power
The beacon operates from both 12V and 24V power systems. According to the supplied specifications, current consumption is 2A at 12V and 1A at 24V.
Power is supplied through the included cigarette lighter connection, providing a straightforward way to operate the beacon from a compatible vehicle socket.
This dual-voltage design makes the beacon suitable for the specified range of compatible trucks, lorries, vans and commercial vehicles.
Practical 3.5 Metre Coiled Cable
Beacon positioning is not determined solely by the location of the vehicle's power socket. The supplied 3.5 metre coiled cable provides useful reach between the cigarette lighter connection and the beacon.
The coiled design keeps the power connection integrated with the beacon while allowing additional flexibility during positioning. Always route the cable so that it does not interfere with driving controls or safe vehicle operation.
IP65 Protected Housing
The beacon has an IP65 protection rating. This means the housing provides protection against dust and water jets.
The housing is made from polycarbonate, while the complete beacon weighs 600 g. Its approximate height is 20 cm and the base measures approximately 15 cm in diameter.
Technical Specifications
- Product type: amber flashing beacon
- Operating voltage: 12V / 24V
- Current consumption at 12V: 2A
- Current consumption at 24V: 1A
- Light source: 80 x 5730 SMD LEDs
- Light colour: amber
- Number of warning modes: 3
- Mode 1: rotating light effect
- Mode 2: six-flash pattern
- Mode 3: double-flash pattern
- Height: approximately 20 cm
- Base diameter: approximately 15 cm
- Cable length: 3.5 m
- Cable type: coiled cable
- Power connection: cigarette lighter plug
- Mounting method: magnetic base
- Housing material: polycarbonate
- Weight: 600 g
- Protection rating: IP65
- Approval and marking: E9, ECE R10
- Specified vehicle applications: trucks, lorries, vans and commercial vehicles
How to Use
- Select a suitable metal surface on the vehicle for positioning the beacon.
- Make sure the selected mounting area is suitable for the magnetic base.
- Place the magnetic base securely onto the selected metal surface.
- Check that the beacon is securely positioned before use.
- Route the 3.5 metre coiled cable carefully towards the vehicle's power connection.
- Make sure the cable does not interfere with the safe operation or controls of the vehicle.
- Connect the cigarette lighter plug to a compatible 12V or 24V socket.
- Use the three-position function switch to select the required warning pattern.
- Select Mode 1 for the rotating light effect.
- Select Mode 2 for the six-flash pattern.
- Select Mode 3 for the double-flash pattern.
What's Included
- 1 x 12V / 24V amber LED flashing beacon with magnetic base
- 3.5 m coiled power cable with cigarette lighter plug
Important Information
Always install the Amber Flashing Beacon on a suitable metal surface. Before use, check that the magnetic base is securely positioned and that the beacon is correctly located on the vehicle.
The beacon must be connected to a compatible 12V or 24V cigarette lighter socket. According to the supplied specifications, current consumption is 2A at 12V and 1A at 24V.
Route the 3.5 metre coiled cable carefully. The cable must not interfere with vehicle controls or the safe operation of the vehicle.
The beacon has an IP65 protection rating, providing protection against dust and water jets. The housing is manufactured from polycarbonate.
The supplied product information specifies E9 and ECE R10 approval and marking information.
Choose an Amber Flashing Beacon that combines quick magnetic positioning with flexible vehicle power and multiple warning patterns. With 80 x 5730 SMD LEDs, three selectable modes, 12V/24V operation, a 3.5 metre coiled cable and IP65 protection, it brings the essential features together in one practical vehicle warning light.
