Built for life in motion.

Thoughtful gear for life on the road.

Car wash brush head 27 cm, threaded, flow-through, for telescopic handles

€12,76
Article number: 12388EH

Car wash brush head – water flows out through the bristles as you scrub, so you wash and rinse in one go, and the soft bristles are gentle on paintwork.

If the head of your telescopic wash brush has worn out or broken, you don't need to buy the whole brush again: screw this replacement head onto the handle and carry on washing.

27 cm wide brush head with yellow bristles and a threaded socket, for the Convoy 180 cm premium telescopic wash brush and the original DAF wash brush handle. Handle not included.

Key benefits

  • No trips back to the bucket: the head has a hollow threaded socket in the middle. Water from a garden hose connected to the handle runs through it into the bristles, so you rinse as you scrub.
  • Gentle on paintwork: a dense, soft block of bristles does the work in the middle, with longer bristles all round that reach along edges and trim.
  • Covers a wide strip: the head is 27 cm wide, almost the long side of an A4 sheet, so a lorry side takes fewer passes.
  • Replace the head, keep the handle: the head simply screws off and on.
  • Sturdy base: the bristles sit in a reinforced plastic base.

Which handle does it fit?

Two for certain: the Convoy 180 cm premium telescopic wash brush (this is its replacement head) and the original DAF wash brush handle. Other handles only if the thread matches. The manufacturer doesn't state the thread size, so we can't guarantee a fit on other handles.

How to use

  1. Screw the head onto the handle by hand until it stops.
  2. Connect your garden hose to the end of the handle (the hose quick connector is sold separately).
  3. Turn the water on (on the premium handle, with the switch on the grip) and start washing. Turn it off when you pause.
  4. After use, rinse the bristles and leave the head to dry.

Tip: rinse off heavy mud before you start. Grit trapped in the bristles can scratch with any brush.

Technical specifications

Product replacement wash brush head, no handle
Head width 27 cm
Bristles yellow synthetic, dense soft centre, longer bristles all round
Base reinforced plastic, black
Connection threaded, hollow (water flows through)
Handle Convoy 180 cm premium telescopic wash brush, original DAF wash brush handle

What's in the box

  • 1 car wash brush head (no handle)

Car wash brush head FAQ

Does it come with a handle?
No. The car wash brush head comes on its own. With a handle, it is part of the Convoy 180 cm premium telescopic wash brush.

Do I need a hose?
No. The car wash brush head also works from a bucket; for continuous rinsing you need a garden hose connected to the handle.

Will it scratch the paint?
Its soft bristles are made for gentle washing. Keep them clean, because grit caught in any brush can scratch.

Can I use it on a car?
Yes. It's made for lorries and trucks, but works the same way on motorhomes, vans and cars.

If the head of your 180 cm premium telescopic wash brush has worn out, or you have an original DAF wash brush handle, this 27 cm head screws straight on.

Car wash brush head from the front, threaded socket
Convoy Vibe

Car wash brush head 27 cm, threaded, flow-through, for telescopic handles

€12,76

Car wash brush head – water flows out through the bristles as you scrub, so you wash and rinse in one go, and the soft bristles are gentle on paintwork.

If the head of your telescopic wash brush has worn out or broken, you don't need to buy the whole brush again: screw this replacement head onto the handle and carry on washing.

27 cm wide brush head with yellow bristles and a threaded socket, for the Convoy 180 cm premium telescopic wash brush and the original DAF wash brush handle. Handle not included.

Key benefits

Which handle does it fit?

Two for certain: the Convoy 180 cm premium telescopic wash brush (this is its replacement head) and the original DAF wash brush handle. Other handles only if the thread matches. The manufacturer doesn't state the thread size, so we can't guarantee a fit on other handles.

How to use

  1. Screw the head onto the handle by hand until it stops.
  2. Connect your garden hose to the end of the handle (the hose quick connector is sold separately).
  3. Turn the water on (on the premium handle, with the switch on the grip) and start washing. Turn it off when you pause.
  4. After use, rinse the bristles and leave the head to dry.

Tip: rinse off heavy mud before you start. Grit trapped in the bristles can scratch with any brush.

Technical specifications

Product replacement wash brush head, no handle
Head width 27 cm
Bristles yellow synthetic, dense soft centre, longer bristles all round
Base reinforced plastic, black
Connection threaded, hollow (water flows through)
Handle Convoy 180 cm premium telescopic wash brush, original DAF wash brush handle

What's in the box

Car wash brush head FAQ

Does it come with a handle?
No. The car wash brush head comes on its own. With a handle, it is part of the Convoy 180 cm premium telescopic wash brush.

Do I need a hose?
No. The car wash brush head also works from a bucket; for continuous rinsing you need a garden hose connected to the handle.

Will it scratch the paint?
Its soft bristles are made for gentle washing. Keep them clean, because grit caught in any brush can scratch.

Can I use it on a car?
Yes. It's made for lorries and trucks, but works the same way on motorhomes, vans and cars.

If the head of your 180 cm premium telescopic wash brush has worn out, or you have an original DAF wash brush handle, this 27 cm head screws straight on.

View product