Built for life in motion.

Thoughtful gear for life on the road.

Single Row LED Work Light 180W Combo Beam 12/24V

Heavy-duty 180W LED work light with combo beam. Waterproof, shockproof, and built to last—ideal for trucks, tractors, and off-road vehicles. Read more
15.200 Ft
Article number: 10533EH
Truck Comfort LED Work Light 180W – 7200 Lumen Combo Beam for 12V and 24V Vehicles

Working after dark shouldn't mean working half-blind. This Truck Comfort led work light puts out 7200 lumens from 60 individual 3W LEDs, turning a dark yard, field or roadside into a clearly lit workspace. The combo beam pairs a focused spot for long-range reach with a wide flood for the area right in front of you, so you see both the obstacle ahead and the ground at your feet. It is built for people who need dependable light to keep working when the sun has gone down.

At 550 × 50 × 45 mm the housing stays slim enough to fit along a cab roof, bull bar, boom or roll cage without dominating the vehicle. Because it runs on anything from 9 to 32 volts, the same led work light works on a 12V pickup and a 24V truck or tractor, so you are not tied to one machine. The cool white 6000–6500 K output keeps colours and edges sharp, which is easier on the eyes across a long shift than the yellow glow of older halogen lamps. A 60 cm lead and fixed mounting brackets keep the install straightforward.

Durability is the point of a work lamp, not an afterthought. The aluminium housing and integrated heat sinks pull warmth away from the LEDs, and the IP67 rating means dust and water are kept out even when the weather turns. It handles vibration and an operating range of −40 °C to +80 °C, so it keeps performing on rough tracks and through cold mornings and hot afternoons alike. That combination is what lets it stay on the vehicle season after season instead of being replaced every year.

Key benefits

  • 7200 lumens from 60 × 3W LEDs – enough usable light to see the whole work area at once, so you spot hazards early and finish the job faster instead of squinting into shadow.
  • Combo beam (spot + flood) – one lamp covers both distance and width, which means you don't have to buy and wire two separate lights to get long reach and close coverage.
  • Cool white 6000–6500 K – a natural white tone that lifts contrast and reduces eye strain over long hours, helping you read detail and colour more accurately than yellow halogen.
  • IP67 sealed – dust-tight and protected against water, so rain, mud and washdowns don't get inside and cause flicker or failure when you rely on it most.
  • Aluminium housing with heat sinks – moves heat away from the LEDs to protect output and lifespan, so the light you pay for today is still there in a few years' time.
  • Wide 9–32 V input – fits 12V and 24V electrics without extra converters, so a single model can serve a mixed fleet of cars, trucks and machines.
  • Vibration resistant, −40 °C to +80 °C – stays intact over ruts and potholes and keeps working in frost and summer heat, which means fewer breakdowns and callbacks.
  • Slim 550 mm body with 60 cm cable and brackets – fits tight mounting spots and gives enough lead to reach the loom, so fitting it is quick and doesn't need improvised wiring.

Where you can use it

This is an auxiliary work lamp for people who operate after dark or in poor visibility. Because it accepts 9–32 V and is sealed to IP67, it suits a wide range of vehicles and conditions.

  • Trucks and lorries – extra working light for coupling, loading and night driving support.
  • Tractors and agricultural machines – lighting for field work, harvest and yard tasks after sunset.
  • SUVs and off-road vehicles – forward or area light on rough terrain and trails.
  • Construction and forestry sites – area lighting for machinery and work zones in dust, mud and rain.

Why choose this light

  • Genuinely bright – 7200 lumens replaces guesswork in the dark with a clearly lit work area.
  • One light for the whole fleet – the 9–32 V range covers both 12V and 24V vehicles.
  • Made to survive the job – IP67 sealing, aluminium cooling and vibration resistance.
  • Easier on the eyes – cool white light for cleaner contrast on long shifts.
  • Fits where space is tight – a slim 550 mm body with ready-to-use brackets.
  • Straightforward install – 60 cm cable and secure mounting points.
  • From Truck Comfort – lighting made for commercial vehicles and machinery.

Specifications

Brand Truck Comfort
Power 180 W (60 × 3 W LED)
Voltage 9–32 V DC (12 V / 24 V)
Luminous flux 7200 lm
Colour temperature 6000–6500 K (cool white)
Beam pattern Combo (spot + flood)
Ingress protection IP67
Operating temperature −40 °C to +80 °C
Dimensions 550 × 50 × 45 mm
Cable length 60 cm
Housing material Aluminium
Cooling Aluminium heat sinks
Lens Polycarbonate
SKU 10533EH

In the box

  • 1× LED work light
  • Mounting brackets
  • Mounting screws
Truck Comfort

Single Row LED Work Light 180W Combo Beam 12/24V

15.200 Ft
Truck Comfort LED Work Light 180W – 7200 Lumen Combo Beam for 12V and 24V Vehicles

Working after dark shouldn't mean working half-blind. This Truck Comfort led work light puts out 7200 lumens from 60 individual 3W LEDs, turning a dark yard, field or roadside into a clearly lit workspace. The combo beam pairs a focused spot for long-range reach with a wide flood for the area right in front of you, so you see both the obstacle ahead and the ground at your feet. It is built for people who need dependable light to keep working when the sun has gone down.

At 550 × 50 × 45 mm the housing stays slim enough to fit along a cab roof, bull bar, boom or roll cage without dominating the vehicle. Because it runs on anything from 9 to 32 volts, the same led work light works on a 12V pickup and a 24V truck or tractor, so you are not tied to one machine. The cool white 6000–6500 K output keeps colours and edges sharp, which is easier on the eyes across a long shift than the yellow glow of older halogen lamps. A 60 cm lead and fixed mounting brackets keep the install straightforward.

Durability is the point of a work lamp, not an afterthought. The aluminium housing and integrated heat sinks pull warmth away from the LEDs, and the IP67 rating means dust and water are kept out even when the weather turns. It handles vibration and an operating range of −40 °C to +80 °C, so it keeps performing on rough tracks and through cold mornings and hot afternoons alike. That combination is what lets it stay on the vehicle season after season instead of being replaced every year.

Key benefits

Where you can use it

This is an auxiliary work lamp for people who operate after dark or in poor visibility. Because it accepts 9–32 V and is sealed to IP67, it suits a wide range of vehicles and conditions.

Why choose this light

Specifications

Brand Truck Comfort
Power 180 W (60 × 3 W LED)
Voltage 9–32 V DC (12 V / 24 V)
Luminous flux 7200 lm
Colour temperature 6000–6500 K (cool white)
Beam pattern Combo (spot + flood)
Ingress protection IP67
Operating temperature −40 °C to +80 °C
Dimensions 550 × 50 × 45 mm
Cable length 60 cm
Housing material Aluminium
Cooling Aluminium heat sinks
Lens Polycarbonate
SKU 10533EH

In the box

View product